Tuesday 17 September 2019

Weathertight

Well, the aluminium of the window frame came up trumps.


At both top corners the vertical section coming up to the mitre was bent outwards slightly, but I managed to straighten them with careful use of some screw clamps and a mole wrench, before fixing and sealing the corners with Gorilla epoxy glue. When that was set I applied the neoprene window tape all round the edge and then carefully pressed my long M4 screws through all the holes, piercing the neoprene.

This was my cunning plan for making it easier to locate the screws in their holes. Using long screws as a first step, it was easy to position the window with every screw in a hole. Then, one at at a time, I removed the long screw, squeezed a glob of Sikaflex 221 into the hole and inserted the final fixing screw. I had been concerned about the slight warp in the steel work at the top of the window cut out, but the aluminium of the frame eased itself into shape as the screws were tightened, and it all seems weather-tight.


Overall, I'm really pleased with the techniques I've learned with these windows. Drilling and tapping for an M4 screw now seems pretty ordinary, but I have noted how important it is to have the right tools. My original drill bits and taps were simply not up to the job. Getting pieces of the right quality turned it into something pretty straightforward. Painting has also got better as I've gone along. Thinning the paint appropriately was key to getting as good a finish as I'm going to manage.


A mother brought two of this year's brood for an approving inspection, though they seemed more interested in what was available below the waterline!

2 comments:

  1. Replies
    1. Thanks, Marilyn. I see you're trying to get into maintenance mode yourself!

      Delete